DeFelsko PosiTector 200 Guide D'utilisation page 13

WiFi
Allows connection to your local wireless network or mobile
hot spot. Ideal for using your network's internet connection
for synchronizing stored measurements with PosiSoft.net.
See www.defelsko.com/wifi
USB
When USB Drive is checked
a USB mass storage device class which provides users with a
simple interface to retrieve stored data in a manner similar to
USB flash drives, digital cameras and digital audio players.
USB Drive is also required to import stored measurements into
PosiSoft Desktop software.
NOTE:
Stream
Stream individual readings to a USB connected computer via a
serial protocol. Ideal for use with serial compatible SPC data
collection software.
For more information on USB Streaming
NOTE:
visit: defelsko.com/usb/stream/
Sync .net Now
The above WiFi, USB and Bluetooth menus contain a Sync
.net Now option. When selected, the Gage immediately
synchronizes stored measurement data via its respective
communication method (internet connection required).
Alternatively, select Auto Sync .net from within the USB connect
menu to automatically synchronize upon connection to a PC.
Additional measurements added to memory while connected are
synchronized only when the USB cable is disconnected and
reconnected, or when the Sync .net Now option is selected.
WiFi connected gages automatically attempt synchronization
upon power up.
Connect Menu
(Advanced models only)
11
, the PosiTector gage uses