DeFelsko PosiTector 200 Guide D'utilisation page 11

Cursor - The Cursor allows for further analysis of displayed
waveform. Use the (-)( + ) buttons to move the green cursor line left or
right over the waveform. The thickness value is displayed at the top
right of the cursor line. This feature is particularly useful in multi-
layer applications where there are more than 3 distinct layers.
Screen Capture - Press
image copy of the current display. The last 10 screen captures
are stored in memory and can be accessed when connected to a
computer. (see PosiSoft USB Drive pg. 10)
Shortcut:
Press and hold the (-)(+) buttons simultaneously to
capture any screen.
Menu - Press
Exit - Press
Up button to return to the Graphics display.
Layers
Advanced models of the PosiTector 200 are capable of
numerically displaying up to 3 individual layer thicknesses in a
multi-layer system.
Select the Layers menu option to:
- Choose up to 3 individual layer thickness values.
- Edit layer names and Batch Chart colors.
NOTES:
• Before setting up the Gage for multi-layer measurement, it
is recommended that you first take measurements in single
layer mode and interpret the results using the Graphics
option. (see pg. 8)
• When a batch is Open, press the Up button to view the
Batch Chart.
to access the Gage's main menu.
to close the Graphics display. Press the
(Advanced models only)
9
to capture and save an