Removal From Service/Winterization - Manitowoc iAuCS Manuel D'installation, D'utilisation Et D'entretien

Operation

Removal from Service/Winterization

Leaving solutions in the iAuCS® in freezing temperatures
may result in severe damage to the dispensing pump. A
failure of this nature is not covered by the warranty.
If the iAuCS® is to be removed from service for extended
periods, or if it is to be exposed to ambient temperatures
32°F (0°C) or below, follow this procedure:
1. Remove the Cleaning or Sanitizing solution bottle.
2. Follow the instructions for your model ice machine to
pump all of the solution out of the dispensing pump and
lines:
• "Indigo® NXT Hose Priming" on page 16
• "Indigo® Model Hose Priming" on page 18
20

Notice
Part Number 000009036 Rev03 9/18
Section 3