Manitowoc iAuCS Manuel D'installation, D'utilisation Et D'entretien page 13

Section 2
3. Locate and remove either the membrane material or the
plug from the ice machine.
4. Apply food grade silicone and install Y connector through
the hole in the ice machine base. Connect the clear vinyl
tubing to one side of the Y branch. The other side is for
the plug removed in step 3 or the plug provided with the
iAuCS®.
Insero Y
iNnneioNr
wtoh oubtng
Insoall plug
prNvtded wtoh
tAuCS®
Nr
plug remNved tn
Soep 3
Y-CNnneioNr
Part Number 000009036 Rev03 9/18
RNuoe oubtng
oN ohts area
TNp Vtew
CNnneio
Tubtng
InoN Base Nf
Iie Maihtne
5. Determine the amount of tubing required in the iAuCS®
control box and cut off the excess tubing.
6. Slide the tubing on the iAuCS® pump.
Sltde ohe oubtng
Nn ohe tAuCS®
pump
Installation
13