General Warnings: Safety - Installation - Use; Installation Precautions - Nice Filo400 Instructions Et Avertissements Pour L'installation Et L'utilisation

1
GENERAL WARNINGS: SAFETY - INSTALLATION - USE (original instructions in Italian)
CAUTION Important safety instructions. Observe all the instructions as improper installation may cause serious damage
CAUTION Important safety instructions. It is important to comply with these instructions to ensure personal safety. Store these
instructions
• Before commencing the installation, check the "Product technical specifications", in particular whether this product is suitable for automating your
guided part. Should it be unsuitable, DO NOT proceed with the installation
• The product cannot be used before it has been commissioned as specified in the "Testing and commissioning" chapter
CAUTION According to the most recent European legislation, the implementation of an automation system must comply with the
harmonised standards set forth in the Machinery Directive in force, which allow for declaring the presumed conformity
of the automation. On account of this, all operations regarding connection to the mains electricity, as well as product
testing, commissioning and maintenance, must be performed exclusively by a qualified and skilled technician!
• Before proceeding with the product's installation, check that all materials are in good working order and are suitable for the intended applications
• The product is not intended for use by persons (including children) with reduced physical, sensory or mental capacities, nor by anyone lacking suf-
ficient experience or familiarity with the product
• Children must not play with the appliance
• Do not allow children to play with the control devices of the product. Keep the remote controls out of reach of children
CAUTION In order to avoid any danger from inadvertent resetting of the thermal cut-off device, this appliance must not be powered through an
external switching device, such as a timer, or connected to a supply that is regularly powered or switched off by the circuit
• Provide a disconnection device (not supplied) in the plant's mains power supply, with a contact opening distance that ensures complete disconnec-
tion under the conditions envisaged by Overvoltage Category III
• Handle the product with care during installation, taking care to avoid crushing, knocks, falls or contact with liquids of any kind. Keep the product
away from sources of heat and open flames. Failure to observe the above can damage the product and increase the risk of danger or malfunctions.
If this should happen, stop installation immediately and contact the Customer Service
• The manufacturer assumes no liability for damage to property, items or persons resulting from non-compliance with the assembly instructions. In
such cases the warranty does not cover material defects
• The weighted sound pressure level of the emission A is lower than 70 dB(A)
• Cleaning and maintenance to be carried out by the user must not be effected by unsupervised children
• Before intervening on the system (maintenance, cleaning), always disconnect the product from the mains power supply
• Check the system periodically, in particular all cables, springs and supports to detect possible imbalances, signs of wear or damage. Do not use if
repairs or adjustments are necessary, because a failure with the installation or an incorrectly balanced automated system may lead to injury
• The packaging materials of the product must be disposed of in compliance with local regulations
• Keep persons away from the gate when it is moved through the control elements
• When performing a manoeuvre, keep an eye on the automated mechanism and keep all bystanders at a safe distance until the movement has been
completed
• Do not operate the automation if anyone is working on it; disconnect the power supply before permitting any work to be carried out
• Prior to installing the drive motor, check that all mechanical components are in good working order and properly balanced, and that the automation
moves correctly
• If the gate being automated has a pedestrian door, the system must include a control device inhibiting the operation of the motor when the pedestrian
door is open
• Make sure that the controls are kept at a safe distance from moving parts, while allowing a good view of these.
Unless a selector is used, the controls should be installed at least 1.5 m from the ground and must not be accessible
• If the opening movement is controlled by a fire-prevention system, make sure that any windows larger than 200 mm are closed by the control ele-
ments
• Prevent and avoid any form of trapping between the moving and fixed parts during manoeuvres
• Permanently affix the manual operation label next to the element enabling the manoeuvre itself
• After installing the drive motor, make sure that the mechanism, protective system and all manual manoeuvres operate properly
1 – English

INSTALLATION PRECAUTIONS