Setting Up The Client Pc For Network Postscript 3 Printing (Post Script ® Level 3 Language Emulation ) Using Ps Printing Will Allow Smoother Job Recovery; Adding A Network Port (If You Do Not Already Have One Available) - Xerox F2121 Guide Utilisateur

At the end of the procedure, you must restart your system. Close all running programs, select Y
RESTART MY COMPUTER NOW
S
ETTING UP THE CLIENT
P
OSTSCRIPT
(P S
OST CRIPT
U PS P
SING RINTING WILL ALLOW SMOOTHER JOB RECOVERY
Printer port setup in Windows 2000 and XP necessitates administrator rights.
A printer port is the interface through which your computer communicates with the terminal. If you want to print over a
network, you must add a new network port for the terminal. When you use the print server setup, the port is added only
on the print server, which must be running Windows 2000, 2003 Server or XP.
The procedures for adding a network port for the RAW and LPR protocols are described in the table below. The first steps
are identical for the two protocols.
and click F
INISH
3
PRINTING
® 3
LEVEL
A
DDING A NETWORK PORT
(
IF YOU DO NOT ALREADY HAVE ONE AVAILABLE
.
PC
FOR NETWORK
LANGUAGE EMULATION
- 17 -
, I
ES WANT TO
)
)