Note: It is possible that a device may not be shown in the list. In this case, click the N
lowing window is displayed :
Enter the IP address or the NetBIOS name of the device you want to add. You can test the connection between
the PC and the device by clicking the T
Select the device you want to add from the list. Click N
Depending on the configuration of your terminal, select the print language, PCL or GDI_RL. Click N
The following window lists the different properties of the printer about to be installed. Click N
A window showing that installation was successful is displayed. Click Finish.
button. Click OK.
EST
.
EXT
- 15 -
button. The fol-
OT IN THE LIST
EXT
.
EXT
.