Installation Instruction; Physical Dimension Of The Outdoor Unit And Mounting Hole - Gree GMV-ND224PH/A-T Manuel D'utilisateur

4 Installation Instruction

Note: The picture is only used for reference and the actual product prevails.
Please observe the following installation principle to insure the operating unit is perfect:
☆There is enough space for the installation and maintenance. Otherwise, there is not any obstacle near the air inlet
and outlet of the indoor and outdoor units.
☆Good ventilation is needed for outdoor unit;
☆Install the unit at a place where is adequate to withstand the weight of the unit and is insulated against all noise,
which makes sure the noise doesn't disturb the neighbors;
☆Only use the appointed suspender orifice to suspend outdoor unit. Please protect the unit when suspending it, and
forbid destroying sheet metal in case of rustiness;
☆Never expose the unit under direct sunshine;
☆Rain water and thaw water should be discharged in time;
☆The place must insure outdoor unit will not be under the influence of snow, rubbish, oil smear;
☆Rubber or spring absorber should be installed on the outdoor unit to meet the standard of noise and vibration;
☆Installation dimension should observe the installation instruction, and outdoor unit must be fixed on the
installing place;
☆Please call GREE appointed professional people to install units.

4.1 Physical Dimension of the Outdoor Unit and Mounting Hole

1) Outdoor unit physical dimension
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
GM V5 Compact Series VRF Outdoor Unit
(Unit: mm.)
Fig.2 Outdoor unit physical dimension
6