Installation Guideline Of Outdoor Unit; Instruction To Installation; Installation Of Outdoor Unit; Outline Dimension Of Outdoor Unit - Gree GRS-CQ8.0Pd/NaE-K Manuel D'utilisateur

SPLIT TYPE

6. Installation Guideline of Outdoor Unit

6.1 Instruction to installation

(1) Installation of the unit must be in accordance with national and local safety codes.
(2) Installation quality will directly affect the normal use of the air conditioner unit. The user is prohibited from
installation. Please contact your dealer after buying this machine. Professional installation workers will
provide installation and test services according to installation manual.
(3) Do not connect to power until all installation work is completed.

6.2 Installation of outdoor unit

6.2.1 Select installation location of outdoor unit
(1) Outdoor unit must be installed on a firm and solid support.
(2) Outdoor unit shall be installed close to the indoor unit, hence to minimize the length and bends of cooling
pipe.
(3) Avoid placing the outdoor unit under window or between two constructions, hence to prevent normal
operating noise from entering the room.
(4) Air flow at inlet and outlet shall not be blocked.
(5) Install at a well-ventilated place, so that the machine can absorb and discharge sufficient air.
(6) Do not install at a place where flammable or explosive goods exist or a place subject to severe dust, salty
fog and polluted air.

6.2.2 Outline dimension of outdoor unit

(1) GRS-CQ8.0Pd/NaE-K(O),GRS-CQ10Pd/NaE-K(O)
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
650
980
19
Air-to-water Heat Pump Split Versati
427
395