Installation Instruction; Schematic Diagram Of Installation Spaces; Requirements For Communication Line - Gree GMV-ND100L/A-T Manuel D'utilisateur

Multi VRF Floor Standing Indoor Unit

3 Installation Instruction

3.1 Schematic diagram of installation spaces

Notes:
① The unit shall be installed by the professional personnel according to this installation instruction to ensure
proper use.
② Please contact the local Gree appointed service center before installation. Any malfunctioncaused by the
unit that is not installed by the Gree appointed service center would probably not be dealt with on time
because of the inconvenience of the business contact.
③ It should be guided under the professional personnel when the air conditioner unit is moved to other
place.

3.2 Requirements for Communication Line

Note:
If the unit is installed in the place with strong electromagnetic interference, shielded wire must be applied on
the communication wire between indoor unit and wired controller. Twisted pair line with shielding function must be
applied on the communication wire between indoor unit and indoor unit (outdoor unit).
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
Fig3.1
4