Thermo Fisher Scientific mySPIN 6 Manuel D'instructions page 5

CAUTION
alone are flammable, explosive, or corrosive, or may cause any
other hazard.
CAUTION
environment.
CAUTION
plastic or rubber or cause cracks in the rotor.
CAUTION
mechanical damage. The rotor must be cleaned with a pH-neutral
cleaning liquid.
CAUTION
methods except those recommended in this manual, contact
Thermo Fisher Scientific to ensure that the proposed method will
not damage the device.
CAUTION
sure to use containers that are tested to Risk Group II or above
and that more than one level of protection is provided in the case
of materials of a higher Risk Group.
CAUTION
centrifuging immediately and allow the rotor to come to a
complete stop. Clean and troubleshoot the product according to
the instructions under "Troubleshooting" before any further use
of the product. Contact an authorized dealer or the manufacturer
if trouble persists.
CAUTION
the user nor any other person.
CAUTION
authorized service personnel only. Contact Thermo Fisher
Scientific.
CAUTION
the instrument voids the warranty. If there is a failure during the
warranty period, contact Thermo Fisher Scientific for warranty
service.
CAUTION
installed or repaired.
mySPIN 6 Instruction Manual
Do not centrifuge materials that in combination or
Do not operate in a hazardous or flammable
Do not use any solvent on the unit that may attack
Ensure the rotor is protected from corrosion and
Before using any cleaning or decontamination
If a single level of hazard protection is required, make
Should the unit fail to work to specification, stop
Always work in a manner which endangers neither
Repairs are to be performed by trained and
Opening the instrument housing or improper use of
Do not use units that have not been correctly
Safety Precautions | 3