Thermo Fisher Scientific mySPIN 6 Manuel D'instructions page 11

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

WARNING
person or hazardous substances are present within a 12" (30 cm)
zone around the centrifuge when operating.
8.
Tubes of equal weight and size shall be placed opposite each other. Use
sample or water in tube to provide balance. Proper sample balancing
illustrated below.
9.
Do not force tubes into the rotor. Use adapters and correctly sized rotors for
your application.
Figure 3. SnapSpin Circular Rotor
Figure 4. SnapSpin Strip Tube
10. Close lid securely. A properly closed lid will grasp the front silicon tab
keeping the lid closed. If a clicking sound is heard while the unit is operating,
the lid is not fully closed. Do not attempt to operate with the lid removed or
open. Turn power switch ON. Unit will not operate with lid open. If there is a
smooth whirring sound and the unit accelerates with little or no vibration,
mySPIN 6 is ready to use. If there are loud or unusual sounds, or excessive
vibration, DO NOT OPERATE. Contact the Thermo Fisher Scientific
Technical Support.
11. To stop centrifugation, press power switch and wait until the rotor has
completely stopped rotating before opening the lid.
WARNING
Avoid severe personal injury or property damage from moving
parts.
mySPIN 6 Instruction Manual
The laboratory procedure shall ensure that no
Do not open lid until rotor has completely stopped!
Operation |
9

Publicité

Table des Matières
loading

Table des Matières