Troubleshooting; Disposal - Thermo Fisher Scientific mySPIN 6 Manuel D'instructions

Troubleshooting

Table 1. Troubleshooting
Problem
Not working
No light
Excessive
vibration
Noise
clicking
sound
Rotor falls off

Disposal

The equipment you purchased may contain hazardous substances that could
impact the environment. Per regulations on electronic devices in the European
Community, you must use the appropriate disposal systems to avoid exposure of
these substances to the environment. The disposal systems will reuse or recycle
hazardous materials from your equipment responsibly.
The crossed-out wheeled bin symbol invites you to use those systems.
If you need more information on the collection, reuse and recycling systems,
please contact your local or regional waste administration. You can also contact
us for more information on the environmental performance of our products.
12 | Maintenance
Possible Cause
Loose connection of
power cord / adapter
Front ON / OFF switch
Lid not closed
Rotor not installed
correctly
Rotor not balanced
correctly
Soft or uneven surface
Lid not fully closed
Rotor not attached
Solution
Check power cord / adapter
Press front ON / OFF switch
Close Lid
Reinstall rotor
Check for tubes of equal
weight and location (see
Operation)
Place the mySPIN 6 on a
sturdy and level surface.
Close Lid engaging silicon
tab with cover
Reattach rotor (See Rotor
Replacement)
mySPIN 6 Instruction Manual