MRA 4025066168743 Instructions De Montage page 3

GB
Read this manual carefully and check the parts list for completeness before you begin. We recommend
Number
1 MRA screen
1 Protective edge strip
2 Clamping sleeves
1 ABE booklet
Mounting the windscreen on the motorcycle:
1. Place the motorcycle on a flat surface.
2. Carefully remove the cover screen.
3. Bring the new cover screen into position and fix it using the original screws.
4. Fit the protective edge strip on the rear exposed part of the screen.
5. Push the clamping sleeves over the ends of the protective edge strip and
lightly compress them, using a pair of pliers to secure the protective edge
strip profile.
After installation, check that all of the screws are tight; tighten them up if necessary. Repeat this at
regular intervals. Clean the screen with water, neutral soap and a sponge. Do not use solvents, alcohol or
MRA-Klement GmbH Siemensstr. 6 D-79331 Teningen Tel.: +49 7663 93890 Email: info@mra.de
Thank you for buying a MRA Windshield.
that you have your screen fitted by an authorised workshop.
Article
spirits to clean the screen as they will damage it.
MO UN T IN G IN STR UC T ION S
YAMAHA Ténéré 700 2019-
Article No..
--- Size 4 Allen key
---
---
---
2
Required tools