Making An Espresso - Krups XP46 Manuel D'utilisation

IFU_KR_XP4600_nafta_NC00026259-01 18/11/11 13:51 Page14
English

5. MAKING AN ESPRESSO

In order to extract the maximum flavor from the beans, this machine
pre-infuses each cup. The pump works for 3 seconds, pauses for
3 seconds, and then continues until the cup is finished
P R E H E AT I N G T H E A C C E S S O R I E S
For the best results, we recommend that you preheat the filter holder
before espresso grounds are added, and warm the cups.
n Fill the water tank with fresh cold water and turn the machine on
(fig.1, 2, 3 and 4).
n Put the filter holder in place, place the cups below.
As soon as the required temperature is achieved, the light will stop
flashing.
n Turn the dial to the
n Press either the button
n When the cups are filled with hot water, turn the dial to the
position (fig.10).
n Remove the cups, taking care to not spill the water.
n Unlock the filter holder by pressing the
while turning the handle to the left to release, and remove the filter
holder from the machine (fig.11).
Note: Use the cup warming tray to warm espresso cups.
W I T H G R O U N D C O F F E E
The type of coffee you choose strongly influences the strength and
flavor of your espresso. Always use coffee beans ground to the
proper size for espresso. Too fine a grind will result in espresso that
is over-extracted and bitter. Too coarse a grind will result in
espresso that is under-extracted and weak in flavor. The perfect
espresso grind will feel like fine grains that do not clump when
pressed together.
Store your espresso grounds in an airtight container, and in a cool,
dry place to retain the flavor. Grounds should not be kept for long
periods of time as the flavor will be reduced over time.
Do not use instant coffee, or coffee for drip coffee machines.
14
position (fig.8).
for 1 cup or the button for 2 cups.
button on the handle