Before First Use - Krups XP46 Manuel D'utilisation

IFU_KR_XP4600_nafta_NC00026259-01 18/11/11 13:51 Page13
n To obtain an espresso at exactly the right temperature, we recommend
that you preheat your cups.
IMPORTANT!
Before using for the first time, after a prolonged period
of inactivity or after descaling, the machine must be
cleaned as described in Section 4: "BEFORE FIRST
USE".
4. BEFORE USING FOR THE FIRST TIME
Before using your espresso machine for the first time, clean all
the accessories in soapy water and dry them.
P R I M I N G O F YO U R M A C H I N E :
Use the following procedure to prime the machine:
n Open the lid and remove the water tank by lifting up on the handle
(fig.1).
n Fill it with water (fig.2).
n Replace the water tank by positioning it firmly, to ensure the water
inlet is in place, and close the lid (fig.3).
n Press the
n Insert the filter holder (without espresso grounds) in the machine and
turn to the right (fig.7).
n Place a container under the filter holder large enough to hold all the
water in the water tank.
n Once the machine has reached the correct temperature, the button
will stop blinking. Turn the dial to the
on the two cup position
all the water in the tank run through.
n If the container you are using has a smaller capacity than the water tank,
turn the dial back to the
necessary. Empty the container, replace under the filter holder, and turn
the dial back to the
n Repeat as necessary until the water tank is empty.
n Once all the water has been drained from the water tank, remove and
empty the container, press the
the filter holder handle to the left to remove (fig.11).
button to turn the machine on (fig.4).
(fig.9) several times if necessary and let
(fig.10) to pause the water flow when
position.
position (fig.8) then press
button on the filter holder and turn
English
13