Information On Preparing An Espresso; Technical Features And Accessories - Krups SOLO DIECAST XP601050 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English

INFORMATION ON PREPARING AN ESPRESSO

To obtain an espresso which is rich in aromas and creamy, the quality of the water, the temperature, the
variety of coffee, the roasting process, the fineness of the ground coffee, the dosage and the extraction
pressure are all determining elements.
Water
Always use clean fresh water and change the water every day. Water with a low mineral content is
preferred.
Temperature
For the first coffee or if multiple espressos are made during the day or if the machine is turned off between
each espresso, it is recommended that you dispense the equivalent of 1 cup of hot water as if you were
making a coffee but without using ground coffee.This helps preheat the group head, the filter holder, the
filter and the cup, allowing the coffee to maintain the ideal temperature for longer once in the cup.
Important
Do not pour a coffee into a cup at room temperature. This will cause the temperature of the espresso
to cool too quickly. It is recommended that you turn on your machine 10 to 15 minutes before making
the coffee and rest the cups on the cup warming plate. It heats up quickly and reaches a temperature
that is sufficiently high enough to heat the cups quickly and efficiently.
Coffee roasting
You can use any coffee variety for your espresso; the main thing is that it is fresh.
Coffee grinding
If the coffee is ground too finely, it will cause too much resistance to the hot water flow causing this to
overheat and "burn" the coffee, thus lending it a distinct bitterness. Too much resistance will also cause
the coffee to be dispensed drop by drop causing the foam not to form in the cup. If the coffee is ground
too coarsely it will provide no resistance to the water flow. The infusion time is therefore too short, resulting
in coffee that is not very creamy and does not release enough aromas.

TECHNICAL FEATURES AND ACCESSORIES

n Power: 1250 W
n Voltage: 120 V ~ 60 Hz
n Pump pressure: 15 bars
n Dimensions: L: 10.6 H: 12 W: 10
n Steel surface
n Product accessories:
8
- 1 spoon
- One 1 cup filter
- One 2 cup filter
- One cleaning needle

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Xp6010

Table des Matières