- DELIVERY AND STORAGE
Sabiana radiant panels are supplied on wooden pallets
with cardboard separators to prevent damage. Upon
receipt, make sure that the material is intact and corre-
sponds to the supply.
The vehicle unloading operations are the responsibility
of the recipient.
To prevent the separators from staining the painted
surface of the panel, avoid storing the material outside,
exposed to the elements (rain and/or fog). The panels
must in any case be stored in a dry place away from the
elements.
- HANDLING
Panels must be handled by at least two people.
5
mt
- PRODUCT IDENTIFICATION
Each panel features an identification label indicating the
manufacturer's details and the relative model. The Sabia-
na DS series is CE marked in compliance with European
Standard EN 14037-1.
- DISPOSAL
Consumables and replaced parts should be disposed of
safely and in accordance with the environmental pro-
tection legislation.
The person performing installation and maintenance
throughout the entire service life of the device must
carefully follow the instructions below and comply with
the following requirements:
The packaging consists of recyclable materials such
as cardboard and polystyrene (EPS). Also the paper
instructions, bags and protective polythene sheets (PE)
are made with recyclable material.
If the system has antifreeze liquid added to it, the latter
must not be discharged freely, because it is a polluting
substance. It must be collected and suitably disposed of.
Oil, grease, detergents, solvents and paint residues must
be disposed of in accordance with current laws and
regulations.
The materials resulting from dismantling the appliances
must be separated and disposed of in authorised collec-
tion centres in accordance with the laws and regulations
in force.
Insulation material is considered as non-hazardous
waste; it must be removed and disposed of in authori-
sed collection centres in accordance with the laws and
regulations in force.
English
19