Safety Requirements - Sabiana DS-ST18 Série Instructions Pour L'installation, L'utilisation Et L'entretien

English
- ESSENTIAL SAFETY RULES
Read this manual carefully before starting unpacking and
assembly operations!
All persons involved in the installation, commissioning
and use of this product are required to transmit this ma-
nual to those involved and in parallel, or subsequently,
to the end user or to the operator responsible for the
installation.
Keep this manual until its final decommissioning!
Sabiana radiant panels are built according to the stan-
dards and recognised safety rules. However, use may
cause hazards for people or damage to the product or
other property if it is not installed and commissioned
correctly or used improperly.
Sabiana radiant panels must be used exclusively for
heating indoor environments, therefore it is not suitable
to be used:
- for outdoor installations;
- for installations in damp environments such as, for
example, swimming pools;
- for installation in explosive atmospheres;
- for installation in corrosive atmospheres.
During storage and installation, the products must be
protected against moisture.
If in doubt, use must be agreed with the manufacturer.
Any other or further use is considered an improper use.
The installer/operator is held solely responsible for any
damage caused. Proper use also includes compliance
with the installation instructions described in this manual.
The installation of this product requires skills in the he-
ating sector. This knowledge, which is usually taught in
vocational training in the employment fields mentioned
above, is not described separately. Malfunctions or da-
mage due to improper installation are the responsibility
of the installer.

- SAFETY REQUIREMENTS

Attenzione! Radiant panels may have sharp edges that
can cause injuries. Handling the panel incorrectly can
result in bruising and breaking bones due to its weight.
For this reason, during assembly wear gloves, a hard hat
and safety shoes and, if possible, only move panels with
a hoist or forklift!
18
- USING AND STORING THE MANUAL
This instruction manual is intended for the machine
user, owner and technical installer and must always be
available for consultation.
The instruction manual indicates the intended use of the
machine, its technical features and provides indications
as to its correct use, cleaning, adjustments and use. It
also provides important indications for maintenance, for
residual risks and anyhow to carry out operations with
particular attention.
This manual must be considered as a part of the machi-
ne and must be kept for future reference until the final
scrapping of the product.
The instruction manual must always be available for
consultation and preserved in a dry and protected area.
Should it be lost or damaged, the user can request a new
manual from the manufacturer or retailer, indicating the
product model and its code displayed on the rating plate.
This manual reflects the state of technology at the mo-
ment it was drafted. The manufacturer reserves the right
to update production and following manuals without
being obliged to update previous versions as well.
The manufacturer will not be held liable in case of:
- improper use or misuse;
- use nonconforming to that expressly specified in this
publication;
- changes to the product or any other unauthorised
intervention;
- total or partial failure to comply with the instructions;
- exceptional events.