Sabiana DS-ST18 Série Instructions Pour L'installation, L'utilisation Et L'entretien page 22

English
Declaration of Performance DS-ST18
1. Unique identification code of the product-type:
1. Model type:
2. Intended use:
3. Manufacturer: Sabiana Spa – Via Piave 53 – 20011 Corbetta (MI) – Italy – Tel.: +39 02 972031 –
info@sabiana.it
6. Systems of assessment and verification of constancy of performance of the construction product as set
out in CPR305/2011, Annex V:
7. Test Laboratory: KERMI GmbH – Plattling
8. Declared performances:
Reaction to fire
Release of dangerous substances
Pressure tightness
Surface temperature
Resistance to pressure
Durability Surface protection
Rated thermal
output
Thermal output
in different
operating
conditions
10. The performance of the product identified in points 1 and 2 is in conformity with the declared
performance in point 8. This declaration of performance is issued under the sole responsibility of the
manufacturer identified in point 4.
Signed for and on behalf of the manufacturer by: Mr Nicola Binaghi (President)
Corbetta, 30/05/2018
22
Declaration of Performance n° DOP014
– www.sabiana.it
l
Class A1
No release
Pass
Maximum 120 °C
Pass
Class 0
DS-ST
W/m 201 335
K 1,933 3,247 4,448
n 1,159 1,157 1,173
489 620 761 218
5,731 7,173 2,075
1,169 1,164 1,161
EN 14037-1
372 521 667
3,354 4,569 5,852
1,175 1,182 1,182