Securing The Smoker To The Grill Barrel; Installing The Cooking Components - Pit Boss PB0600SS Mode D'emploi

7. SECURING THE SMOKER TO THE GRILL BARREL

Parts Required:
2 x Washer (#B)
2 x Locking washer (#C)
Screw (#D)
2 x
Installation:
• From inside, secure the Main Cabinet to the side panel
of the Main barrel using two screws, washers, and
locking washers.

8. INSTALLING THE COOKING COMPONENTS

Parts Required:
6 x Cooking Grid Support Brackets (#9)
Cooking Grid (#8)
3 x
Installation:
• Insert three Cooking Grid Support Brackets into the
holes along the left side wall of the interior Main
Cabinet. Once positioned in the holes, tilt downward
to secure into position. Note illustration 8A.
• Repeat the same process, matching the same heights,
for the right side wall.
• Last, place the Cooking Grids one-by-one, on the
Grid Support Brackets inside the Main Cabinet. Note
illustration 8B.
• The unit is now completely assembled.
7
8A
9
8B
8
BCD
7