Ec-Declaration Of Conformity - Batavia BT-CRS001 Mode D'emploi

DISPOSAL
Do not dispose of electric power tools
with domestic refuse.
The electric power tool is shipped in
packaging to reduce transport damage. This
packaging is a raw material and as such can
either be reused or can be fed back into the
raw material cycle. The electric power tool and
its accessories are made from various materi-
als such as metals and plastics. Take defective
components to a special refuse collection
point. Ask about these at your specialist shop
or local council. The product and the user
manual may be subject to changes. Technical
data may be changed without prior notice.
Batteries
Think of the environment when disposing of
batteries. Contact your local authorities to find
out where your nearest disposal area is.
Do not dispose of batteries with domestic
refuse.
Do not dispose of by burning, risk of explosion.
7062250_18V_repsaw-Ma-#1505-01.indb 19

EC-DECLARATION OF CONFORMITY

We, the Batavia GmbH, Weth. Buitenhuis-
straat 2a, NL-7951 SM Staphorst, declare by
our own responsibility that the product
Reciprocating Multisaw, Model BT-CRS001,
Item-No 7062250 is according to the basic
requirements, which are defined in the Euro-
pean Directives 2011/65/EU; Electromag-
netic Compatibility 2004/108/EC; Low Volt-
age Directive (LVD) 2006/95/EC and their
amendments. For the evaluation of conformity,
the following harmonized standards were
consulted:
EN 55014-1:2006+A1+A2,
EN 55014-2:1997+A1+A2,
EN 61000-3-2:2014,
EN 61000-3-3:2013,
EN 60335-1:2012+A11,
EN 60335-2-29:2004+A2,
EN 62233:2008
Staphorst, 15 February 2015
Meino Seinen, QA Representative
Batavia GmbH, Weth. Buitenhuisstraat 2a,
7951 SM Staphorst, Netherlands
.
English
19
22-05-15 13:36