Manual Out Of Range Function; Dual Watch - Midland G9 PLUS Manuel Utilisateur

If you decide to change the channel dedicated to the Emergency function, do not
forget to make the same change to all the radios!
To set again the original Emergency channel (P8 DCS 50)
1. Press the MENU button until the display shows EC on.
2. Push MENU again and select of
To confirm press PTT or wait for 5 seconds.
3.
If you dedicate any of the standard channels to the Emergency function, remem-
ber to use it only for this purpose, otherwise you will cause interferences.

Manual Out of range function

This function allows you to know if there are any radios within your range.
By pushing EMG twice, you will send a request of acknowledge to the other G9
Plus operating within your range and tuned on the same channel. If any radio
replies, it means that it's within your range and you will receive an audio tone
for confirmation.
This function can be used only if the "Automatic Out of Range" feature is not
active.

Dual Watch

The Dual Watch allows you to monitor constantly two channels of your choice
at the same time.
Enabling - Disabling
1. Press the MENU button until the display shows DW of.
2. Select the second channel to monitor by pushing ▲▼.
3. To confirm your selection, press PTT or wait for 5 seconds.
4. The display will alternately show the channel in use and the second chan-
nel to monitor.
5. To stop the function, simply press MENU.
When the transceiver detects a transmission on one of the two channels, the
Dual Watch temporarily pauses, remains tuned for 5 seconds on the corre-
sponding channel, giving the user a chance to respond to a CALL. After this
pause, the Dual Watch starts again.
This function can be activated only if the "Emergency" feature is disabled.
20 | Midland G9/G9E Plus instruction guide