Keypad Lock; Mon (Monitor) Function / Squelch; Scanning All The Channels; Menu" Key - Midland G9 PLUS Manuel Utilisateur

14

Keypad lock

Keep pressed CALL/
mation. Only PTT, EMG and CALL/
keep pressed again CALL/

MON (Monitor) function / Squelch

20
The Monitor button is for temporarily excluding (opening) the squelch, in order
to listen to signals that are too weak to keep the squelch permanently opened.
19
To activate the monitor function, keep pressed for about 2 seconds both ▲▼
19
at the same time. Follow the same procedure to deactivate the function, or
switch off and on the radio.
18
When MON is active, you will probably hear a constant background noise.
21
18
22
You can activate the Monitor feature only if the "Emergency" function is disabled.
EMG
17
23
24
17
CALL
16

Scanning all the channels

EMG
CALL
16 MENU
15
MENU
Midland G9 Plus can automatically search for signals throughout the bands by
scanning the channels in rapid sequence. This function is useful to find out any
active channel.
When a signal is detected, the scanning pauses on that channel for 5 seconds.
Press ▲ for 2 seconds: the scanning will start.
To stop it, push PTT: the Midland G9 Plus will go back to the channel from
which the scanning originally started.
You can activate the scanning feature only if the "Emergency" function is disa-
bled.

"MENU" key

The following features can be selected by using the "MENU" button:
› Channel selection
› CTCSS tone setting
› DCS tone setting
› High/low power selection (only in the PMR446 band)
› VOX
› VibraCALL function
› Call melodies
› Roger Beep
› Keypad Beep
14 |
for about 5 seconds. and
for 5 seconds approx.
20
20
21
EMG
CALL
21
22
EMG
MENU
23
22
24
23
24
15
15
will be displayed as confir-
remain active. To disable this function,
20
21
22
23
24
15
Midland G9/G9E Plus instruction guide