Midland G9 PLUS Manuel Utilisateur page 9

Your Midland G9 Plus keeps you constantly updated about its operational sta-
tus through a Liquid Crystal Display (LCD). The symbols and their correspon-
ding parameters that may appear, according to the operational status of the
device, are described as follows:
1. CHANNEL
2. VOX
3.
4. EMG
5. DW
6.
20
7.
8. OUT
9. RX
21
20
22
10. TX
23
24
11. H(High) / L(Low)
15
12. CTCSS/DCS
21
13. CTCSS/DCS tone These three small digits indicate the code of the
22
23
24
14. ROGER
15
Midland G9/G9E Plus instruction guide
These two large digits indicate the selected channel
VOX function activated
This symbol appears when the keypad lock is acti-
vated
Emergency function activated
Dual Watch activated
Indicates the battery status
Vibra-Call function activated
Indicates if the Automatic Out of Range function
looses contact with the other radios
Reception mode
Indicates the transmission (PTT pressed)
High or low power selection. The output power of
the big PTT depends on your selection
Indicate the type of sub audio tone selected
CTCSS/DCS tones selected (1-38 / 1-104)
Roger Beep activated
| 9