Emergency Call Function; Activating / Deactiving The Emergency Feature; Changing The Emergency Channel - Midland G9 PLUS Manuel Utilisateur

Masquer les pouces Voir aussi pour G9 PLUS:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Emergency Call function

The Midland G9 Plus dedicates a channel to the Emergency Calls: all the G9
Plus operating within your range, even if tuned on different channels, can re-
ceive/transmit Emergency messages on that channel.
If you keep pressed the EMG button, the communications automatically
switch to the emergency channel ("EC" on the display). An audio signal will be
sent and all the G9 Plus operating within the range will automatically go to the
Emergency channel ("EC").
If you have disabled this function, you won't receive/transmit any Emergency
Call.
When the radio is operating on the Emergency channel (EC displayed), all the
buttons except PTT and CALL are disabled.
The G9 Plus will return to the channel in use after one minute from the last
transmission.
To return immediately, push EMG. Now you can use all the MENU functions.

Activating / Deactiving the Emergency feature

When you switch on the unit, the Emergency function is activated, but you can
disable and enable it again:
1.
Press MENU till the display shows EC on.
Select EC of by using ▲▼ .
2.
3.
Confirm your selection by pushing PTT or wait for 5 seconds.
When the Emergency function is activated (EMG blinking on the display) the
following functions cannot be used: Scan, Monitor, Dual Watch, Out of Range.

Changing the emergency channel

The emergency channel originally preset is P8 DCS 50; but you can change it
according to your needs.
Important: be sure that the Emergency function is active! (EMG blinking). If you
decide to change the channel dedicated to the Emergency function, do not forget
to make the same change to all the radios!
1.
Press the MENU button until the display shows EC on.
2.
Push MENU again (of displayed) and select the desired channel by me-
ans of ▲▼.
To confirm press PTT or wait for 5 seconds.
3.
Important: be sure that the Emergency function is active! (EMG blinking).
Midland G9/G9E Plus instruction guide
| 19

Hide quick links:

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

G9e plus

Table des Matières