Call Another Handset; Voicemail - Motorola D710 Série Mode D'emploi

D711_IFU_EN_for_EU.book Page 10 Friday, August 24, 2007 3:58 PM

Call another handset

I
1. Press .
• If you have two handsets, the other handset is called automatically.
• If more than two handsets are registered to the base, their numbers are displayed, e.g. 2345*.
Enter the number of the handset you want to call or press
>
2. Press to hang up.
NOTE
If the handset does not belong to D700/710 range, this function may not be available.
Transfer an external call to another handset
I
1. During an external call, press .
- Your caller is put on hold.
2. Enter the number of the handset you want to call or press
- If there are only two handsets, the other handset is called automatically.
3. When the other handset answers, announce the caller then press
I
other handset does not answer, press to talk to your caller again.
Switch between an internal and external call
I
1. During an external call, press .
- Your caller is put on hold.
2. Enter the number of the handset you want to call or press
- If there are only two handsets, the other handset is called automatically.
3. When the other handset answers you can speak privately to your internal caller.
I
4. Press to switch between both callers.
>
5. Press to hang up.
Three-party conference call
I
1. During an external call, press .
- Your caller is put on hold.
2. Enter the number of the handset you want to call or press
- If there are only two handsets, the other handset is called automatically.
3. When the other handset answers, announce the call then press and hold
calls. If the other handset does not answer, press
>
4. Press to hang up.

Voicemail

If you have subscribed to your network's voicemail service (if available), your D711 displays
when you have a new message. Depending on your country and network services, the voicemail
number may be pre-stored in your handset for one touch dialling using the
NOTE
The voicemail number is pre-stored only if the country where the phone was purchased offers a
voicemail service. If the voicemail number is not pre-stored you can add a number, or overwrite
the existing stored number. See page 12.
Dial your network voicemail service
1
1. Press and hold .
- The number is displayed and dialled. Follow the voice prompts to play, save and delete
your messages.
10
Or
If
NOTE
You can turn off the
*
5
to ring all handsets.
hold
*
to ring all handsets.
>
to transfer the call. If the
*
to ring all handsets.
*
to ring all handsets.
I
to connect both
I
to talk to your caller again.
1
button.
<
is displayed in a call list, press to dial the network voicemail number.
icon. When viewing the Calls log, press and
.
Using the phone