Ribimex PRGES2000I Mode D'emploi page 52

6.3- Transport and storage
Before transporting or storing the generator, proceed as follows:
(1) Close the fuel tap.
(2) Allow generator to cool.
(3) Close the fuel cap securely.
(4) Close the fuel tank breather. Do not close the breather before the engine is completely cool.
For storage longer than six months, the generator must be prepared as follows:
6.3.1- Drain the fuel from the carburettor (Fig. 26)
(1) Turn the fuel valve (5) to the OFF position.
(2) Unscrew the 5 screws of the maintenance cover (4) and remove it.
(3) Remove the drain hose (1) from the hole at the bottom of the housing and place a suitable
container.
(4) Unscrew the drain screw counter clockwise.
(5) Drain the gasoline from the carburettor (2) into the container with the drain hose (1).
(6) Securely tighten the drain screw (3) clockwise.
6.3.2- Drain the fuel from the tank (Fig. 27)
(1) Unscrew the cap and remove the filter from the tank.
(2) Empty the fuel tank through the tank neck (1) into a suitable container by gently tilting the
generator.
(3) Replace the filter and the tank cap.
(4) Tighten the cap firmly clockwise.
- 49 -