Ribimex PRGES2000I Mode D'emploi page 45

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Notes:
(1) If you wish to carry out the exact monitoring of the remaining fuel, you must click on "Click
to calculate after filling fuel tank" provided that you completely fill the fuel tank. Otherwise, he
can not control the correct data.
(2) When the remaining fuel quantity is too low, the "remaining fuel" icon appears to remind
you to refuel.
(3) The environment may affect the maximum control distance between the generator and the
smartphone. If placed in the open area, the maximum surveillance distance may exceed 100
meters.
4.6.4- Starting the generator
It is possible to start the generator directly from your smartphone / app to make sure your
smartphone is connected. To do so, follow the instructions below:
1. Click on "Start" in the "Management" tab.
2. A message "Do you really want to start the generator? Appears, click on YES.
3. Another message appears to make sure the generator is ready to start:
"Be careful, please check the following items before starting":
"The engine oil level is OK" = The oil level is sufficient
"There is enough fuel in the fuel tank" = there is enough fuel in the tank
"Turn on the fuel tap" = Open the fuel tap
"Turn on the engine switch" = set the engine switch to ON
4. Once the 4 checks above have been confirmed, click on OK.
Notes:
Open the fuel cock and set the engine switch to ON before starting. Use the choke (START
position) for any cold engine.
- 42 -

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

605066

Table des Matières