Ribimex PRGES2000I Mode D'emploi page 41

4.4- Stopping the engine
Turn off the generator when it is no longer needed/used.
1. Turn off all appliances plugged to the generator then disconnect them.
2. Set the fuel valve to the OFF position (Fig. 17).
3. Set the motor switch (red) to the OFF position (Fig. 18)
4. Let the engine cool down and put the breather in the OFF position (Fig. 19).
WARNING :
Always let the generator cool down before moving it.
Wait until the generator is cool to place the breather in the OFF position.
Fig. 17
Fig. 18
Fig. 19
- 38 -