Ribimex PRGES2000I Mode D'emploi page 38

3. Set the motor switch (red) to the ON position (Fig. 9).
4. Set the ECO switch (black) to the OFF position (Fig. 10).
5. Pull the choke towards you in the START position (Fig. 11). Note: The choke is only required to
start a cold engine. Set the choke to the START position for 2 tries only. If the engine still can't
start, set the choke to RUN for 3 retries.
Fig. 8
Fig. 9
Fig. 10
- 35 -