Getting Started - Ribimex PRGES2000I Mode D'emploi

reach the L mark, the oil level is too low, fill to the upper limit with the recommended oil (Fig.
6).
5. Screw in the oil dipstick and replace the oil maintenance compartment.
6. Make sure there is no oil leakage on the generator.
3.5.2- Engine oil recommendations
Oil is a major factor affecting performance and service life. Use 4-stroke automotive lubricating oil.
SAE 10W40 API SE/SF/SG/SH/SJ or more.
IV. GETTING STARTED
4.1- Unpacking
- Remove product from its packaging.
- Check that tool and accessories are not damage
4.2- Assemble
The generator is delivered assembled.
4.3- Starting the engine
1. Place the fuel breather in the ON position (Fig. 7).
2. Place the fuel valve in the ON position (Fig. 8).
\
Fig. 7
- 34 -