Ribimex PRGES2000I Mode D'emploi page 44

4. Before clicking "OK" on the "New devices" page, disconnect your WIFI by keeping the "New
devices" page opened. Reconnect your WIFI to make sure your smartphone can connect to the
network and click OK on the "New devices" page. An "Add success" message will appear to
confirm that the generator has been successfully added to the application.
Note: Once the builder is added to the "Management" tab, it will be automatically saved unless you
remove it manually.
4.6.3- Generator connection and monitoring
1. Connect to the PRGES2000I network again.
2. Click on "Monitor" in the "Management" page.
Note: you can control: power, current, voltage, frequency, remaining fuel, remaining time, total
running time, total fuel consumption rate and total power output.
- 41 -