Steam Function - Krups XP 2000 Mode D'emploi

knob (O) to the central position (10).
• When the desired quantity of espresso has been made (35 ml), turn the selector
10
• Put the filter holder with the empty filter in place (6) (7) and push the brew button to
• Remove the filter holder from the brewing head and throw away the used coffee pod.
purge and clean the filter of coffee sediment.

2. STEAM FUNCTION

The thumping noise which occurs while steam is being produced comes from the inter-
mittent regulation of the pump and has no effect on the proper working of the machine.
If you wish to make an espresso immediately after using the steam function, the
appliance must first be allowed to cool down in order to achieve the correct
When you turn the selector to the O setting, the appliance automatically cools
temperature for preparing an espresso.
down, launching 3 pumping cycles. The cold water pumped in this way cools down
heating system is released along with hot water into the drip tray. The release of
the heating system. During the pumping cycles, the excess steam contained in the
steam and the accompanying noise are required for the appliance to cool down.
Caution: during and after use, the metal parts of the nozzle (E) and the cappuccino
accessory (F) are very hot.
. Using the Cappuccino accessory (F)
The cappuccino accessory makes it easy to produce hot milk or frothy milk for making
a cappuccino, latte or hot chocolate, for example.
• Fill the water container with fresh, cold water (1) (2) (3) and turn on the machine (4).
It is preferable to use very cold, very fresh, milk (kept in the refrigerator).
1
Espresso
• Put the cappuccino accessory in place on the steam nozzle.
• Place a cup under the cappuccino accessory.
• Pour about 30 oz (1/2 cup or 100 ml) of cold milk into a container.
• When your appliance is ready to make an espresso, turn the selector knob (O) to
preheat mode
Espresso
2
(15).
3
Espresso
14
4
Espresso Caffé
KRUPS