Krups XP 2000 Mode D'emploi page 17

. The cappuccino accessory
For more thorough cleaning, the auto cappuccino accessory can be dismantled from
the machine.
Cappuccino accessory has to be cleaned properly after each use.
Clean it with water, a little non-abrasive dish soap and a small brush. Rinse and dry it.
Before putting it back in place, make sure that the air inlet holes (on both sides of the
necessary (22).
little metal tube) are not blocked by residues of milk. Unblock them with a needle if
22
1
!!
2
Descaling
• Descaling of your espresso should be done fairly frequently with citric or tartaric acid.
• Use caution when descaling your espresso machine as the acid substance within the
descaling powder may damage countertops or any other surface it comes in contact
• The limited warranty does not include espresso machines which do not
with.
function, or do not function properly, because descaling has not been carried
out.
We recommend using the Krups descaling accessory, reference F054, which is
available from Krups after-sales service centers. This accessory includes, apart from
two descaling doses, a testing strip for water hardness to assess the frequency of des-
caling of your appliance in normal use. Descaling depends on the hardness of the
water, but also on the use cycle. The frequently of descaling indicated by the F054
- Then follow the following method:
accessory is thus given by way of indication only.
• Unscrew the grid from the brewing head of the appliance and clean it (21).
• Remove the Claris-Aqua Filter System cartridge if you have installed one.
21
• Dissolve a sachet of KRUPS descaling accessory, reference F054, in half a litre of
• Start the appliance by pressing button (N) (4). As soon as the appliance reaches the
luke warm water and pour the whole lot into the empty water tank.
right temperature, the orange temperature control light switches off.
18
KRUPS