Krups XP 2000 Mode D'emploi page 7

1
Espresso
container compartment (3) and close the lid.
• Place the water container back into the machine by positioning it firmly in the water
3
• Turn on the machine by pressing button (N) (4). The pump will work for 2 seconds to
fill the system with hot water for a cup of hot coffee from the start.
4
Espresso
• As soon as the appliance reaches the right temperature, the orange temperature
• Your espresso maker is equipped with three filters designed for 1 cup, or for 2
control light switches off (P).
cups of espresso using ground coffee, or for E.S.E. (Easy Serving Espresso)
pods. The first is in the filter holder (I), the other two are found in the
applianceʼs transport packaging.
• Choose the filter that you wish to use and place it in the filter holder (5). Store the
2 others in the espresso lid (A).
5
• Then place the filter holder under the appliance's brewing head. To ensure that the
45 degree angle (6), place the filter holder flat against the brewing head, then turn
filter holder is in the correct position, turn the handle so it points to the left at a
the handle towards the right (7) as far as it can go.
2
Espresso
Caffé
8
KRUPS