Smoke Chamber Insulation Panel Replacement - Napoleon HIGH COUNTRY 5000 Serie Manuel D'installation

installation and replacement
EN

smoke chamber insulation panel replacement

7.3.1
note:
For clarity purposes, some parts of the appliance have been hidden. The illustrations below are of
views looking up into the smoke chamber.
1. Slide front and rear baffle up and out of retaining bracket and pivot straight down and out of smoke chamber.
Brackets
2
2. Remove 2 screws from 3 brackets then slide
upper right side panel (1) out. Repeat for upper
left side panel (2).
4. Remove 2 screws from front right bracket and
slide front right panel (4) out of smoke chamber.
Repeat for front left panel (5).
note:
To ease installation, we recommend loosely installing the side and front panel brackets in place then installing
panels and tightening fasteners to secure.
6. Slide lower left side panel into smoke chamber and install the bracket removed in step 5. Repeat for lower
right side panel.
7. Slide front panels into smoke chamber and install brackets removed in step 4.
8. Slide rear panel into smoke chamber and install bracket removed in step 3.
9. Slide upper right side panel into smoke chamber and install brackets removed in step 2. Repeat for upper left
side panel.
10. Slide rear baffle into smoke chamber and install bracket removed in step 1. Repeat for front baffle.
note:
Smoke chamber insulation panels are fragile. Handle with care.
32
W415-1720 / G / 05.14.21
Brackets
1
Front of appliance
5 4
Front of appliance
3
Front of appliance
3. Remove 2 screws from rear baffle bracket and
slide rear panel (3) out of smoke chamber.
7
Front of appliance
5. Remove 2 screws from bottom bracket and slide
lower right side panel (6) out. Repeat for lower left
side panel (7).
6