6.1
door & screen operation
Insert door tool into screen and glass door receiver bottom left corner to raise and lower the door. When not in
use, store in a close by location. Do not leave the door tool installed during regular operation as it will become
extremely hot.
To swing open the glass door, lift the latch on the right side up and swing the door outward.
WARNING
!
•
The appliance should be operated with either the glass or screen door closed other than when loading wood.
Latch
note:
To prevent the rapid rise of the doors, since they are balanced with counterweights, it is recommended to
secure the cable on the top of the door frame when removing the door or screen frames for service.
6.0 operation and adjustment
operation and adjustments
EN
25
W415-1720 / G / 05.14.21