Polaris VICTORY MOTORCYCLES HAMMER 2010 Mode D'emploi page 55

Mechanical Clutch
1. Squeeze the clutch lever toward the handlebar and
release it. It should move freely and smoothly, and
it should return to the rest position quickly when
released. If the lever fails to perform as stated, ser-
vice the clutch lever before riding.
2. Freeplay (gap) is the amount of lever movement
from the rest position to the point of cable
resistance. Clutch lever freeplay should be 0.5-1.5
mm. Measure the gap between the clutch lever and
the lever housing. Adjust clutch lever freeplay if
necessary. See page 98.
Tip: The starter interlock switch is dependent on the clutch
lever freeplay being set correctly to ensure activation of
the clutch safety switch.
Pre-Ride Inspections
Lever
Housing
0.5-1.5 mm
Freeplay
Clutch
Lever
53