Polaris VICTORY MOTORCYCLES HAMMER 2010 Mode D'emploi page 39

Left Handlebar Controls
Clutch Lever
To disengage the clutch, pull the lever toward the han-
dlebar. To engage the clutch, gradually release the lever.
For smooth clutch operation, pull the lever quickly and
release it gradually.
Tip: The motorcycle is equipped with a clutch interlock switch
that prevents the engine from starting when the transmis-
sion is in gear and the clutch is engaged. See page 60.
Instruments, Features and Controls
Turn Signal Switch
Move the switch to the left to activate the left
turn signals. Move the switch to the right to acti-
vate the right turn signals. A signal will deacti-
vate automatically when speed or distance reach
predetermined levels. To cancel a signal manu-
ally, move the switch to the center position and
push it inward.
Momentary Feature: Move the turn signal
switch left or right and hold it in that position
for at least one second. The momentary feature
will activate and the signal will then cancel
when the switch is released.
37