Battery Installation - Polaris VICTORY MOTORCYCLES HAMMER 2010 Mode D'emploi

Maintenance
Battery

Battery Installation

1. Before installing the battery, make sure it's fully charged and clean.
2. Slide the battery into position in the battery tray with the positive (+) terminal to the rear of the motorcycle.
NOTICE: Connecting the battery cables to the wrong terminals can severely damage the electrical system.
3. Connect the positive (+) battery cables, tighten securely and install the red boot.
4. Connect the negative (-) cables and tighten securely. Be sure cables have adequate side cover clearance.
5. Reinstall the battery cover.
6. Reinstall the left side cover.
117