Polaris VICTORY MOTORCYCLES HAMMER 2010 Mode D'emploi page 36

Instruments, Features and Controls
Indicator Lights
Neutral Indicator
The neutral indicator illuminates when the
transmission is in neutral and the ignition key is
ON.
Headlamp High Beam Indicator
The headlamp high beam indicator illuminates
when the headlamp switch is set to high beam.
See page 36.
Check Engine Indicator
The check engine indicator will illuminate any
time the ignition switch is in the ON position
and the engine control module sensors report
abnormal sensor or engine operation. The check
engine indicator will continue to illuminate as
long as the fault condition exists. It also illumi-
nates momentarily when the ignition switch is in
the ON position and the engine is not running.
This demonstrates that the indicator is function-
ing properly.
34
Neutral
Low Oil
Pressure
NOTICE: If the check engine indicator illuminates while the
engine is running, a serious engine problem may
exist. Contact an authorized VICTORY dealer as
soon as possible.
Headlamp Check
High Beam Engine
Low
Turn
Fuel
Signal