Polaris VICTORY MOTORCYCLES HAMMER 2010 Mode D'emploi page 101

Clutch (Mechanical)
Mechanical Clutch Lever Lubrication
1. Remove the right side cover. Loosen the clutch cable adjuster lock nut.
2. Turn the cable adjuster all the way inward to provide maximum lever freeplay.
3. Remove the clutch lever pivot nut and screw. Disconnect the clutch cable from the
clutch lever.
4. Remove any old grease and dirt from the lever and housing. Lubricate the clutch
lever and pivot screw with VICTORY Moly Assembly Grease or VICTORY All
Purpose grease.
5. Reconnect the clutch cable. Reinstall the lever, pivot screw and nut. Hold the
screw down and torque the nut to 40 in-lbs (5 Nm).
6. Adjust clutch lever freeplay. See page 98.
Maintenance
Pivot Screw
AP
Pivot
Nut
99