Polaris VICTORY MOTORCYCLES HAMMER 2010 Mode D'emploi page 123

Headlight Lamp Replacement
High intensity discharge lamps should be handled only by a trained technician wearing the appropriate protective
gear. See the VICTORY Service Manual or an authorized VICTORY dealer.
Halogen Lamps (8-Ball Models)
1. Unplug the wiring harness from the back of the headlight (lift the tab). Be sure to pull on the connector, not on the
wiring.
Tip: Avoid touching a halogen lamp with bare fingers. Oil from your skin leaves a residue, causing a hot spot that will shorten the
life of the lamp. If a lamp is touched, clean it thoroughly with denatured alcohol.
2. Remove the spent lamp. Apply dielectric grease to the socket and install a new lamp.
3. Reinstall the wiring harness.
Maintenance
121