Control Panel - Dometic CoolAir SP950I Notice D'utilisation

Operation
6.2

Control panel

The following control and display elements are available on the control panel for
operating the system:
No. in
Meaning
fig. 2, page 3
1
2 Fault LED (red)
The LED indicates system malfunctions.
3 Compressor LED (yellow)
The LED lights up when the compressor is operating.
4
Use the
Automatic and the Timer function.
5 Digital display
Shows:
• the selected operating mode
• Selected temperature in °C (target)
6 + button
The + button increases the temperature by 1 °C or the timer running
time by 10 minutes.
7 – button
The – button decreases the temperature by 1 °C or the timer running
time by 10 minutes.
8 POWER LED (blue)
The LED indicates that the system is switched on.
9 Infrared receiver (for the remote control)
12
button
button
button to switch between operating modes 1, 2, 3 or
for operating mode 1
for operating mode 2
for operating mode 3
A
for automatic mode
000
for the timer function
CoolAir SP950
EN