Technical Data - ESAB EMP 215ic Manuel D'instructions

3 TECHNICAL DATA

EMS series
• ESAB EMS 215ic power source
• Tweco Fusion™ 180 A MIG torch with 10 ft (3 m) cable / Tweco® pigtail with 0.023 in.
(0.6 mm), 0.030 in. (0.8 mm), 0.035 in. (0.9 mm) contact tips and Operator manual all
in one bag
• Victor® GF-250-50-580 argon flow-gauge regulator
• Gas hose, 6.5 ft (2 m) Male 5/8-18UNF
• Tweco® 200 A electrode holder & lead assembly, 13 ft (4 m), 50 mm dinse
• Tweco® 200 A ground clamp & lead assembly, 10 ft (3 m), 50 mm dinse
• 1 bag of 4 general purpose stick electrodes (E6013, 1/8 in.),
• ER70S-6, 0.030 in., 2 lb, 4 in. (100 mm) bobbin
• Drive roll, 0.023 in./0.030 in. (0.6/0.8 mm) V-groove for mild steel and stainless wires
(installed on drive system)
• Drive roll, 0.023 in./0.035 in. (0.6/0.9 mm) V-groove for mild steel and stainless wires
• Drive roll, 0.030 in./0.035 in. (0.8/0.9 mm) V-knurled for flux cored wires
• Power adapter (230 V – 120 V, 15 A)
• Safety manual
• CD (contains instruction manual - English/French/Spanish, and optional accessory
product data sheets)
• Welding chart (French) Milar
• Quick start guide
EM series
• ESAB EM 215ic power source
• Tweco Fusion™ 180 A MIG torch with 10 ft (3 m) cable / Tweco® pigtail with 0.023 in.
(0.6 mm), 0.030 in. (0.8 mm), 0.035 in. (0.9 mm) contact tip and Operator manual all
in one bag
• Victor® GF-250-50-580 argon flow-gauge regulator
• Gas hose, 6.5 ft (2 m) Male 5/8-18UNF
• Tweco® 200 A ground clamp & lead assembly, 10 ft (3 m), 50 mm dinse
• ER70S-6, 0.030 in., 2 lb, 4 in. (100 mm) bobbin
• Drive roll, 0.023 in./0.030 in. (0.6/0.8 mm) V-groove for mild steel and stainless wires
(installed on drive system)
• Drive roll, 0.023 in./0.035 in. (0.6/0.9 mm) V-groove for mild steel and stainless wires
• Drive roll, 0.030 in./0.035 in. (0.8/0.9 mm) V-knurled for flux cored wires
• Thickness gauge tool
• Power adapter (230 V – 120 V, 15 A)
• Safety manual
• CD (contains instruction manual - English/French/Spanish, and optional accessory
product data sheets)
• Welding chart (French) Milar
• Quick start guide
3 TECHNICAL DATA
Voltage
Primary current
I GMAW - MIG
max.
I GTAW - TIG
max.
0463 407 001
230 V, 1 ~ 50/60 Hz
30 A (27.6 A at 25% duty
cycle)
19 A
- 13 -
EMP 215ic
120 V, 1 ~ 50/60 Hz
Breaker 20 A: 28.6 A
Breaker 15 A: 20.3 A
Breaker 15 A: 20.8 A
© ESAB AB 2017