ESAB EMP 215ic Manuel D'instructions page 131

REPLACEMENTS PARTS
REPLACEMENTS PARTS
EMS and EMP series
Item Ordering no.
1 1017-1338
2 W4013802
3 WS200E13
4 WS200G10
5 0781-9411
6 W4013900
7 W4014000
EM series
Item Ordering no.
1 F180TA103035 Tweco® Fusion™ 180 A MIG gun, 10 ft (3 m)
2 WS200G10
3 0781-9411
4 W4013900
5 W4014000
0463 407 001
Denomination
Tweco® Fusion™ 180 A MIG gun, 10 ft (3 m)
Tweco® 17V TIG torch 12.5 ft (4 m), 8 pin and accessory kit
Tweco® 200 A electrode holder & lead assembly, 13 ft (4 m),
50 mm dinse
Tweco® 200 A ground clamp & lead assembly, 10 ft (3 m),
50 mm dinse
Victor® GF-250-50-580 argon flow-gauge regulator
Gas hose, 12.5 ft (3.8 m) Male 5/8-18UNF
Power adapter (230 V – 120 V, 15 A)
Denomination
Tweco® 200 A ground clamp & lead assembly, 10 ft (3 m),
50 mm dinse
Victor® GF-250-50-580 argon flow-gauge regulator
Gas hose, 12.5 ft (3.8 m) Male 5/8-18UNF
Power adapter (230 V – 120 V, 15 A)
- 131 - © ESAB AB 2017