Flux Cored Wire Mode; Stick Mode; Lift-Tig Mode (Emp235Ic Only) - ESAB EMP235ic Manuel D'instructions

6 CONTROL PANEL
6.1.4

Flux cored wire mode

6.1.5

Stick mode

6.1.6

LIFT-TIG mode (EMP235ic only)

0463 479 001
1. Home screen
2. Information
3. Memory
4. Parameter
5. Wire feed speed
6. Voltage
7. Dialogue box
1. Home screen
2. Information
3. Memory
4. Parameter
5. Amperage
6. Voltage (OCV or arc)
7. Dialogue box
The user must select the ON position to
have output voltage and weld current.
Also the background color indicates the
output state, where blue indicates an
"off" state and orange indicates an "on"
state.
1. Home screen
2. Information
3. Memory
4. Parameter
5. Amperage
6. Dialogue box
- 30 - © ESAB AB 2017