Basic Setup - Kollmorgen SERVOSTAR 600 Mode D'emploi

S600 Safety Guide | 2 English

2.6.3.7 Basic Setup

On the start screen click "Basic Setup" button.
Regen Resistor: Also called brake resistor.Change only if you use an external brake res-
istor.
max. Mains Voltage: Select the nominal mains AC voltage
Mains Phase Missing: You can select either warning "n05" or error "F19" in case of phase
loss. The setting "F19" disables the output stage, "n05" is just a message.
Units: Acceleration, Velocity, Position
Select usable units for your application referring to the moved load.
Leave all other fields unchanged.
Click OK. On the start screen click "Motor" button.
62 Kollmorgen | wiki-kollmorgen.eu | December 2015