Led Indicators - Tripp-Lite B300-9X2-4K Manuel De L'utilisateur

Feature Identification

LED Indicators

LED(s)
1
Display
2
Source (1-6)
3
Combo Port
4
USB
5
Keyboard and Mouse
6
Standby
Installation
Rack Mounting the Switch
The switch can be mounted in a 19" (1U) system rack. To conveniently access the front-panel pushbuttons for configuration
and operation, mount the unit at the front of the rack so that the front panel faces outward.
1. Use the included M3 x 6 Phillips hex head screws to attach the rack mounting brackets onto the front of the unit.
2. Position the unit in the front of the rack and align the holes in the mounting brackets with the holes in the rack.
3. Screw the mounting brackets to the rack.
1 3
Color Status
Amber Indicates the display(s) (A or B) being used.
Green Indicates the source(s) transmitting content.
Green Indicates the source selected for that output combo port.
The connected USB drives are accessible by the indicated Source device
Amber
(Source 1 or 2).
The attached keyboard and mouse are controlled by the indicated Source
Amber
device (1 or 2).
Green Unit is powered ON.
Amber Unit is in Standby mode.
2 4 5
7
6